Autor(en): Justen, Anna
Kurth, Christopher
Schaldach, Gerhard
Thommes, Markus
Titel: Preparation of micron and submicron particles via spray drying and electrostatic precipitation
Sprache (ISO): en
Zusammenfassung: Small particles are of great interest in a variety of applications. Spray drying is a common technique for particle synthesis, but it is limited with respect to sizes below 10 μm. Therefore, a new laboratory-scale spray dryer was designed to address this issue. A novel aerosol generator consisting of a piezo crystal in a swirl chamber was designed to obtain droplets in the low micrometer range. After drying and cooling, particles were deposited in a molten carrier, using melt electrostatic precipitation. The median particle size of three pharmaceutical drug substances was 2 μm. The size distribution was particularly narrow, with span values of about 1.1. Spray drying is a sufficient technique to produce small drug particles below 5 μm with ultrasonic atomization at high frequencies. Electrostatic precipitation in a molten carrier is a suitable method to capture these particles.
Schlagwörter: Electrostatic precipitation
Micronized particles
Spray drying
Ultrasonic atomization
Schlagwörter (RSWK): Elektroentstaubung
Teilchengröße
Zerstäubungstrocknung
Zerstäubung
URI: http://hdl.handle.net/2003/42160
http://dx.doi.org/10.17877/DE290R-23993
Erscheinungsdatum: 2022-11-10
Rechte (Link): https://creativecommons.org/licenses/by-nc-nd/4.0/
Enthalten in den Sammlungen:Lehrstuhl Feststoffverfahrenstechnik



Diese Ressource ist urheberrechtlich geschützt.



Diese Ressource wurde unter folgender Copyright-Bestimmung veröffentlicht: Lizenz von Creative Commons Creative Commons