Autor(en): Vollertsen, F.
Wielage, H.
Titel: Influence of different process parameters on deformation velocity in laser shock forming
Sprache (ISO): en
Zusammenfassung: In laser shock forming TEA-CO_2-laser induced shock waves are used to form metal foils, such as aluminum or copper. The process utilizes an initiated plasma shock wave on the target surface, which leads to a forming of the foil. Several pulses can be applied at one point in order to achieve a high forming degree without increasing the energy density beyond the ablation limit. During the process, pressure peaks in range of MPa can be achieved. In this article, the dependence of deformation velocity in laser shock forming on various materials as well as laser pulse intensities was determined experimentally for a laser shock bending process. In order to categorize these influences a theoretical model for deformation velocity based on the energy balance is proposed, which allows the evaluation of the influencing variables.
Schlagwörter: high speed forming
laser shock forming
shock wave
strain rate
URI: http://hdl.handle.net/2003/27176
http://dx.doi.org/10.17877/DE290R-628
Erscheinungsdatum: 2010
Provinienz: Institut für Umformtechnik - Technische Universität Dortmund
Ist Teil von: 4th International Conference on High Speed Forming, March 9th-10th 2010 Columbus, Ohio, USA
Enthalten in den Sammlungen:ICHSF 2010

Dateien zu dieser Ressource:
Datei Beschreibung GrößeFormat 
02.pdfDNB1.22 MBAdobe PDFÖffnen/Anzeigen


Diese Ressource ist urheberrechtlich geschützt.



Diese Ressource ist urheberrechtlich geschützt. rightsstatements.org