Authors: Baaten, T.
Debroux, N.
De Waele, W.
Faes, K.
Title: Joining of Copper to Brass Using Magnetic Pulse Welding
Language (ISO): en
Abstract: In magnetic pulse welding, electromagnetic pressure is used to deform, accelerate and weld workpieces. The process is mostly used for tubular specimens. In this study, experiments were performed in order to investigate the weldability of copper tubes to brass solid workpieces. The tubes had an outer diameter and wall thickness of 25,0 mm and 1,5 mm respectively. A multi-turn coil with 5 windings in combination with a field shaper was used to focus the electromagnetic flux and thus realize the high pressures needed for welding. The process parameters for joining these materials were optimised for maximum weld length. The parameters taken into account were the position of the field shaper relative to the workpieces, the width of the air gap between the tube and the internal workpiece and the energy level. The weld quality was verified based on metallographic examinations, scanning electron microscopy and hardness measurements.
Subject Headings: brass
copper
magnetic pulse welding
URI: http://hdl.handle.net/2003/27195
http://dx.doi.org/10.17877/DE290R-8664
Issue Date: 2010
Publisher: Institut für Umformtechnik - Technische Universität Dortmund
Is part of: 4th International Conference on High Speed Forming, March 9th-10th 2010 Columbus, Ohio, USA
Appears in Collections:ICHSF 2010

Files in This Item:
File Description SizeFormat 
21.pdfDNB1.59 MBAdobe PDFView/Open
ICHSF2010_Faes.pdfDNB10.5 MBAdobe PDFView/Open


This item is protected by original copyright



All resources in the repository are protected by copyright.