Authors: Park, Hyeon Il
Kim, Daeyong
Lee, Jinwoo
Kim, Ji Hoon
Lee, Myoung-Gyu
Lee, Youngseon
Song, Jung Han
Editors: Huh, H.
Tekkaya, A. E.
Title: Experimental Study on Electromagnetic Forming of High Strength Steel Sheets with Different Dimensions of Aluminum Driver Plate
Language (ISO): en
Abstract: Recently, the potential of the electromagnetic forming process has been introduced to form the shallow longitudinal reinforcement ribs in the lateral walls of roll formed parts, made of high strength steel sheets of 340MPa tensile stress grade [1]. However, it seems that the application may not be easy for high strength steel sheet because of its high tensile strength and low electric conductivity. In order to overcome this difficulty, aluminum driver plate could be considered to enhance the formability of high strength steel sheets in the electromagnetic forming process. In this paper, in order to investigate the effect of aluminum driver plate on forming height of high strength steel sheet in electromagnetic forming process, DP780 workpiece sheets were formed into a hemi elliptical protrusion shape with Al1050 driver plate of various thicknesses and sizes. Experiments were performed with a flat spiral coil actuator connected to an electromagnetic forming system. The results, the aluminum driver plate helps to increase the forming height of high strength steel sheets. In addition, the forming height of high strength steel sheet increases as the thickness and size of a driver plate increases.
Subject Headings: reinforcement rib
aluminum driver plate
electromagnetic forming
flat spiral coil
high strength steel sheet
URI: http://hdl.handle.net/2003/33503
http://dx.doi.org/10.17877/DE290R-15600
Issue Date: 2014
Is part of: 6th International Conference on High Speed Forming, March 27th-29th 2014, Daejeon, Korea
Appears in Collections:ICHSF 2014



This item is protected by original copyright



This item is protected by original copyright rightsstatements.org