Autor(en): Zhang, Shunyi
Kinsey, Brad
Titel: Interfacial Morphology Prediction of Impact Welding by Eulerian Method
Sprache (ISO): en
Zusammenfassung: In this paper, results from LS-DYNA numerical simulations are presented with respect to the interfacial morphology of an impact weld of dissimilar sheet materials, i.e., Cu110 (flyer) and CP-Ti (base), both 1 mm thick. These materials were selected as the workpieces since vortices are known to occur at the interface during experimental welding of this material combination. But a conventional Lagrangian numerical method is not capable of capturing this phenomenon due to large element distortions at the interface. Thus, a numerical simulation with the Eulerian method was used to investigate this local, large plastic deformation of materials at high strain rate. Unlike the Lagrangian method, the surrounding air is modelled in the Eulerian method, with a 5 by 5-micron element size in this research, to capture the vortices at the interface. A Johnson-Cook material model, which is widely used for deformation processes at high strain rates, was used for both flyer and base workpieces. Also, a Mie-Grueneisen’s equation of state (EOS) was defined to describe the variation in pressure based on the dynamic condition of materials.
Schlagwörter: impact welding
interfacial morphology
Eulerian method
vortices
URI: http://hdl.handle.net/2003/37003
http://dx.doi.org/10.17877/DE290R-19000
Erscheinungsdatum: 2018-05-15
Ist andere Form von: http://hdl.handle.net/2003/36955
http://hdl.handle.net/2003/37002
Ist Teil von: 8th International Conference on High Speed Forming
Enthalten in den Sammlungen:ICHSF 2018

Dateien zu dieser Ressource:
Datei Beschreibung GrößeFormat 
1. S. Zhang - Interfacial Morphology Prediction of Impact Welding by Eulerian Method.mp4DNB37.91 MBmp4Öffnen/Anzeigen


Diese Ressource ist urheberrechtlich geschützt.



Diese Ressource ist urheberrechtlich geschützt. rightsstatements.org