Authors: Hajavifard, Ramin
Maqbool, Fawad
Schmiedt-Kalenborn, Anke
Buhl, Johannes
Bambach, Markus
Walther, Frank
Title: Integrated forming and surface engineering of disc springs by inducing residual stresses by incremental sheet forming
Language (ISO): en
Abstract: Disc springs are conical annular discs, which are characterized by a high spring force with a small spring travel and good space utilization. In operation, they must meet high demands on the stability of the spring characteristic and the fatigue strength. Under loading, tensile stresses occur which limit the possible applications of disc springs. Compressive stresses can be generated in the stressed areas by means of shot-peening in order to extend the operating limits for a given yield and fatigue strength. Since the spring geometry and characteristics change during shot-peening, the design of the shot-peening treatment is iterative and cumbersome. The present research proposes an incremental forming process for forming and integrated targeted adjustment of residual stresses in disc springs from metastable austenitic stainless steel (MASS), to achieve improved spring properties and high cyclic strength. The main mechanism of residual stress generation is the transformation of metastable austenite into martensite under the action of the forming tool. Different experimental characterization techniques like the hole drilling method, X-ray diffraction, disc compression tests, optical microscopy and cyclic tests are used to correlate the residual stresses and disc spring properties. A numerical model is developed for simulating the martensite transformation in disc springs manufacturing. The results prove that incremental forming enables process-integrated engineering of the desired compressive residual stresses, entailing a higher spring force of metastable austenitic disc springs in comparison to conventional disc springs. Due to martensite formation, the generated residual stresses are stable under cyclic loading, which is not the case for conventionally manufactured springs.
Subject Headings: Disc spring
Residual stress adjustment
Incremental sheet forming
Metastable austenitic stainless steel (MASS)
Martensite transformation
Numerical modelling
Subject Headings (RSWK): Feder
Stahl
URI: http://hdl.handle.net/2003/38078
http://dx.doi.org/10.17877/DE290R-20060
Issue Date: 2019-05-20
Rights link: https://creativecommons.org/licenses/by/4.0/
Appears in Collections:Fachgebiet Werkstoffprüftechnik

Files in This Item:
File Description SizeFormat 
materials-12-01646-v2.pdfDNB12.23 MBAdobe PDFView/Open


This item is protected by original copyright



All resources in the repository are protected by copyright.