Authors: Kempen, S.
Peier, D.
Title: An Optimised High Current Impulse Source
Language (ISO): en
Abstract: Starting from a predefined 8/20 µs impulse current, the design and construction of an impulse current source is derived. In the first step an equivalent circuit is defined that meets exactly the predefined impulse current. In the next step the components that are required to realise the equivalent circuit diagram are chosen and modelled by their equivalent circuit diagrams. As far as the components do not show ideal behaviour, the stray parameters if the components are determined by calculation and measurement. Further on, the construction parameters for the geometric structure of the plant are derived from the equivalent circuit diagram of the entire impulse generating network. Finally it is shown that the measured current of the realised impulse current generator meets exactly the desired predefined impulse current.
Subject Headings: electromagnetic high-speed forming
impulse current source
optimisation
URI: http://hdl.handle.net/2003/27028
http://dx.doi.org/10.17877/DE290R-12982
Issue Date: 2004
Provenance: Institut für Umformtechnik - Technische Universität Dortmund
Is part of: 1st International Conference on High Speed Forming, March 31, April 1, 2004, Dortmund, Germany
Appears in Collections:High Speed Forming 2004

Files in This Item:
File Description SizeFormat 
28-kempen_etal-040321a.pdfDNB2.17 MBAdobe PDFView/Open


This item is protected by original copyright



This item is protected by original copyright rightsstatements.org