Authors: Linnemann, M.
Lieber, T.
Scheffler, C.
Psyk, V.
Müller, R.
Landgrebe, D.
Title: Influence of Different Strain Rates on the Flow Curve and the Formability of Thin Aluminium and Tinplate Sheets
Language (ISO): en
Abstract: Due to this high number of produced units and the very thin sheet metals used for beverage cans, precise production processes with high production volumes are necessary. To save expenses, while optimising these processes, numerical simulation methods are exploited. Considering this, it is indispensable to identify the material behaviour as exactly as possible. In practise, often results of quasi static tensile tests are used, although these are insufficient for the precise modelling of the material behaviour during can production, since strain rates of up to 10³ s-1 can occur, here. Therefore, quasi static and high speed tensile test have been done on specimens featuring the typical materials and thicknesses of semi-finished parts used for beverage can production. The results were compared with similar materials at higher sheet metal thicknesses and authenticated by numerical simulation. It was shown that there is an influence of the strain rate on the material behaviour and it is necessary to determine material characteristics at strain rates, which are close to the process speed. Furthermore, the results were classified in their signification for beverage can production and forming technologies in general.
Subject Headings: material
high speed tensile test
can manufacturing
URI: http://hdl.handle.net/2003/34943
http://dx.doi.org/10.17877/DE290R-16991
Issue Date: 2016-04-27
Is part of: 7th International Conference on High Speed Forming, April 27th-28th 2016, Dortmund, Germany
Appears in Collections:ICHSF 2016

Files in This Item:
File Description SizeFormat 
23_Linnemann_ICHSF2016.pdfDNB1.86 MBAdobe PDFView/Open


This item is protected by original copyright



All resources in the repository are protected by copyright.