Full metadata record
DC FieldValueLanguage
dc.contributor.authorBaumann, Jonas-
dc.contributor.authorWirtz, Andreas-
dc.contributor.authorSiebrecht, Tobias-
dc.contributor.authorBiermann, Dirk-
dc.date.accessioned2020-07-07T07:21:41Z-
dc.date.available2020-07-07T07:21:41Z-
dc.date.issued2020-07-06-
dc.identifier.urihttp://hdl.handle.net/2003/39197-
dc.identifier.urihttp://dx.doi.org/10.17877/DE290R-21115-
dc.description.abstractMilling processes are often limited by self-excited vibrations of the tool or workpiece, generated by the regenerative effect, especially when using long cantilevered tools or machining thin-walled workpieces. The regenerative effect arises from a periodic modulation of the uncut chip thickness within the frequencies of the eigenmodes, which results in a critical excitation in the consecutive cuts or tooth engagements. This paper presents a new approach for disturbing the regenerative effect by using milling tools which are modified with asymmetric dynamic properties. A four-fluted milling tool was modified with parallel slots in the tool shank in order to establish asymmetric dynamic characteristics or different eigenfrequencies for consecutive tooth engagements, respectively. Measurements of the frequency response functions at the tool tip showed a decrease in the eigenfrequencies as well as an increase in the dynamic compliance in the direction of the grooves. Milling experiments with a constant width of cut and constantly increasing axial depth of cut indicated a significant increase in the stability limit for the specific preparations of up to 69%.en
dc.language.isoende
dc.relation.ispartofseriesJ. Manuf. Mater. Process.;4(3)-
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/-
dc.subjectDynamicsen
dc.subjectMillingen
dc.subjectCutting toolen
dc.subject.ddc620-
dc.subject.ddc670-
dc.titleDisturbance of the regenerative effect by use of milling tools modified with asymmetric dynamic propertiesen
dc.typeTextde
dc.type.publicationtypearticlede
dc.subject.rswkMaschinendynamikde
dc.subject.rswkFräsmaschinede
dc.subject.rswkSpanende Werkzeugmaschinede
dcterms.accessRightsopen access-
eldorado.secondarypublicationtruede
eldorado.secondarypublication.primaryidentifierhttps://doi.org/10.3390/jmmp4030067de
eldorado.secondarypublication.primarycitationBaumann, J.; Wirtz, A.; Siebrecht, T.; Biermann, D. Disturbance of the Regenerative Effect by Use of Milling Tools Modified with Asymmetric Dynamic Properties. J. Manuf. Mater. Process. 2020, 4, 67.de
Appears in Collections:Institut für Spanende Fertigung

Files in This Item:
File Description SizeFormat 
jmmp-04-00067.pdf11.45 MBAdobe PDFView/Open


This item is protected by original copyright



This item is licensed under a Creative Commons License Creative Commons