Autor(en): Beerwald, C.
Homberg, W.
Kleiner, M.
Psyk, V.
Titel: Electromagnetic Compression as Preforming Operation for Tubular Hydroforming Parts
Sprache (ISO): en
Zusammenfassung: With the aim to extent the forming limits of tube hydroforming a concept of using a previous electromagnetic compression operation will be introduced. One important limit for the possibilities of tube hydroforming is set by the initial circumference and the maximum tangential strain of the used material, whereby the initial circumference is typically determined by the smallest local circumference of the workpiece. The application of an appropriate contoured preform makes it possible to use tubes with a larger initial circumference. In the paper the investigation of the suitability of electromagnetic tube compression for the production of such a preform will be presented. The valuation is based on geometric criteria and material properties of the resulting preform which are strongly influenced by the process parameters. The discussed aspects are the roundness of the preform and the strain hardening of the material.
Schlagwörter: electromagnetic forming
hydroforming
process combination
tube compression
URI: http://hdl.handle.net/2003/27040
http://dx.doi.org/10.17877/DE290R-12873
Erscheinungsdatum: 2004
Provinienz: Institut für Umformtechnik - Technische Universität Dortmund
Ist Teil von: 1st International Conference on High Speed Forming, March 31, April 1, 2004, Dortmund, Germany
Enthalten in den Sammlungen:High Speed Forming 2004

Dateien zu dieser Ressource:
Datei Beschreibung GrößeFormat 
16-psyk_etal-040322c.pdfDNB471.41 kBAdobe PDFÖffnen/Anzeigen


Diese Ressource ist urheberrechtlich geschützt.



Diese Ressource ist urheberrechtlich geschützt. rightsstatements.org