Authors: Bach, F.-W.
Beerwald, C.
Brosius, A.
Gershteyn, G.
Hermes, M.
Kleiner, M.
Olivier, H.
Weber, M.
Title: Process Investigation of Tube Expansion by Gas Detonation
Language (ISO): en
Abstract: The present paper deals with the expansion of tubes by direct application of gas detonation waves, i.e. the gas is both pressure medium and energy source. After an introduction to gas detonation forming, measurements of the motion process and the internal pressures are presented. Results of free expansion and of forming into a die are thoroughly studied and compared to the results of quasi-static burst tests and hydroforming. Using pure aluminum Al99.5 and a medium strength alloy AlMgSi1, expansions by 25 % and 20 % respectively are obtained. A simulation delivers details on the deformation process and specially prepared probes of high-speed tension tests give new insight into metallographic material behavior at different strain rates.
Subject Headings: forming
shock wave
tube
URI: http://hdl.handle.net/2003/27063
http://dx.doi.org/10.17877/DE290R-13000
Issue Date: 2006
Provenance: Institut für Umformtechnik - Technische Universität Dortmund
Is part of: 2nd international conference on high speed forming, March 20th - 21st, 2006, Dortmund, Germany
Appears in Collections:ICHSF 2006

Files in This Item:
File Description SizeFormat 
16-Weber_etal.pdfDNB2.45 MBAdobe PDFView/Open


This item is protected by original copyright



All resources in the repository are protected by copyright.