Autor(en): | Bach, F.-W. Beerwald, C. Brosius, A. Gershteyn, G. Hermes, M. Kleiner, M. Olivier, H. Weber, M. |
Titel: | Process Investigation of Tube Expansion by Gas Detonation |
Sprache (ISO): | en |
Zusammenfassung: | The present paper deals with the expansion of tubes by direct application of gas detonation waves, i.e. the gas is both pressure medium and energy source. After an introduction to gas detonation forming, measurements of the motion process and the internal pressures are presented. Results of free expansion and of forming into a die are thoroughly studied and compared to the results of quasi-static burst tests and hydroforming. Using pure aluminum Al99.5 and a medium strength alloy AlMgSi1, expansions by 25 % and 20 % respectively are obtained. A simulation delivers details on the deformation process and specially prepared probes of high-speed tension tests give new insight into metallographic material behavior at different strain rates. |
Schlagwörter: | forming shock wave tube |
URI: | http://hdl.handle.net/2003/27063 http://dx.doi.org/10.17877/DE290R-13000 |
Erscheinungsdatum: | 2006 |
Provinienz: | Institut für Umformtechnik - Technische Universität Dortmund |
Ist Teil von: | 2nd international conference on high speed forming, March 20th - 21st, 2006, Dortmund, Germany |
Enthalten in den Sammlungen: | ICHSF 2006 |
Dateien zu dieser Ressource:
Datei | Beschreibung | Größe | Format | |
---|---|---|---|---|
16-Weber_etal.pdf | DNB | 2.45 MB | Adobe PDF | Öffnen/Anzeigen |
Diese Ressource ist urheberrechtlich geschützt. |
Diese Ressource ist urheberrechtlich geschützt. rightsstatements.org