Autor(en): Özkaya, Ekrem
Michel, Sebastian
Biermann, Dirk
Titel: Experimental and computational analysis of the coolant distribution considering the viscosity of the cutting fluid during machining with helical deep hole drills
Sprache (ISO): en
Zusammenfassung: An experimental analysis regarding the distribution of the cutting fluid is very difficult due to the inaccessibility of the contact zone within the bore hole. Therefore, suitable simulation models are necessary to evaluate new tool designs and optimize drilling processes. In this paper the coolant distribution during helical deep hole drilling is analyzed with high-speed microscopy. Micro particles are added to the cutting fluid circuit by a developed high-pressure mixing vessel. After the evaluation of suitable particle size, particle concentration and coolant pressure, a computational fluid dynamics (CFD) simulation is validated with the experimental results. The comparison shows a very good model quality with a marginal difference for the flow velocity of 1.57% between simulation and experiment. The simulation considers the kinematic viscosity of the fluid. The results show that the fluid velocity in the chip flutes is low compared to the fluid velocity at the exit of the coolant channels of the tool and drops even further between the guide chamfers. The flow velocity and the flow pressure directly at the cutting edge decrease to such an extent that the fluid cannot generate a sufficient cooling or lubrication. With the CFD simulation a deeper understanding of the behavior and interactions of the cutting fluid is achieved. Based on these results further research activities to improve the coolant supply can be carried out with great potential to evaluate new tool geometries and optimize the machining process.
Schlagwörter: Computational fluid dynamics (CFD) analysis
Viscosity
Tracer micro particles
Fluid behavior
Helical deep hole drilling
Schlagwörter (RSWK): Numerische Strömungssimulation
Viskosität
Tracer
Fluiddynamik
Tieflochbohren
URI: http://hdl.handle.net/2003/41278
http://dx.doi.org/10.17877/DE290R-23120
Erscheinungsdatum: 2022-02-15
Rechte (Link): http://creativecommons.org/licenses/by/4.0/
Enthalten in den Sammlungen:Institut für Spanende Fertigung

Dateien zu dieser Ressource:
Datei Beschreibung GrößeFormat 
s40436-021-00383-w.pdf3 MBAdobe PDFÖffnen/Anzeigen


Diese Ressource ist urheberrechtlich geschützt.



Diese Ressource wurde unter folgender Copyright-Bestimmung veröffentlicht: Lizenz von Creative Commons Creative Commons