Hybrid additive manufacturing of metal laminated forming tools

Simple item page
dc.contributor.advisorTekkaya, A. Erman
dc.contributor.authorDardaei Joghan, Hamed
dc.contributor.refereeSehrt, Jan T.
dc.date.accepted2024-02-27
dc.date.accessioned2025-10-24T08:54:04Z
dc.date.available2025-10-24T08:54:04Z
dc.date.issued2024
dc.description.abstractThis thesis introduces and investigates a new resource-efficient manufacturing method for rapid tooling. The presented hybrid method combines two additive manufacturing processes: sheet metal lamination and direct energy deposition (DED). In this combination, the core of the forming tool is fabricated by sheet lamination in a short time and at a low cost. The resulting step areas are compensated by laser metal deposition (LMD), which is a subset of the DED process. Three post-processing methods, milling, ball burnishing and laser polishing, are applied and compared to improve the surface roughness of the deposited areas. The results show the essence of the two-step filling strategy, in which a bonding step should bond together the tool sheets, and in the next step, the remaining stair-step areas should be filled by LMD. The tensile strength of the fillet bonding for different process parameters and tool sheet combinations shows that the higher laser power and feed rate result in higher strength; however, the sheet thickness also needs to be considered to avoid the melt-through of the thin sheets. In the filling step, filling in the radius direction shows better surface roughness, but the nozzle life is shorter. The preheating of the die sheet to reduce the residual tensile stress shows only a 25 % reduction, which causes waviness of the deposited surface. Therefore, it can be neglected. A semi-analytical model to analyze the stress distribution showed the possibility of using the low-strength tool sheets in a major part of the laminated tool. Deep drawing experiments are successful for two types of blanks. The wear test study shows low wear of the dies manufactured by the hybrid method in comparison with the conventional method. The feasibility of manufacturing complex geometries is demonstrated by a manufactured demonstrator. The economic and technological advantages of the hybrid method are compared with conventional and fully manufactured tools by LMD, and the number of possible sheet combinations for tool lamination is reduced by considering cost and energy criteria.en
dc.identifier.urihttp://hdl.handle.net/2003/44048
dc.language.isoen
dc.relation.ispartofseriesReihe Dortmunder Umformtechnik; 123
dc.subjectadditive manufacturingen
dc.subjectrapid toolingen
dc.subjectsheet metal laminationen
dc.subjectlaser metal depositionen
dc.subjectdeep drawing toolsen
dc.subject.ddc620
dc.subject.ddc670
dc.subject.rswkRapid Tooling
dc.subject.rswkBlechverarbeitung
dc.subject.rswkLaserauftragschweißen
dc.subject.rswkTiefziehwerkzeug
dc.titleHybrid additive manufacturing of metal laminated forming toolsen
dc.typeText
dc.type.publicationtypePhDThesis
dcterms.accessRightsopen access
eldorado.doi.registerfalse
eldorado.secondarypublicationtrue
eldorado.secondarypublication.primarycitationDardaei Joghan, H. (2024). Hybrid additive manufacturing of metal laminated forming tools. Düren: Shaker Verlag. Zugl.: Dortmund, Techn. Univ., Diss., 2024.
eldorado.secondarypublication.primaryidentifierhttps://doi.org/10.2370/9783844094817

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Dissertation_Dardaei_Joghan.PDF
Size:
17.05 MB
Format:
Adobe Portable Document Format
Description:
DNB
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
4.82 KB
Format:
Item-specific license agreed upon to submission
Description:
Download

Collections

Sonstige Veröffentlichungen