Tribological performance of PVD film systems against plastic counterparts for adhesion-reducing application in injection molds
Loading...
Date
2019-09-17
Journal Title
Journal ISSN
Volume Title
Publisher
Alternative Title(s)
Abstract
The deposition of physical vapor deposition (PVD) hard films is a promising approach to enhance the tribological properties of injection molds in plastic processing. However, the adhesion is influenced by the pairing of PVD film and processed plastic. For this reason, the friction behavior of di erent PVD films against polyamide, polypropylene, and polystyrene was investigated in tribometer tests by correlating the relation between the roughness and the adhesion. It was shown that the dispersive and polar surface energy have an impact on the work of adhesion. In particular, Cr-based nitrides with a low polar component exhibit the lowest values ranging from 65.5 to 69.4 mN/m when paired with the polar polyamide. An increased roughness leads to a lower friction due to a reduction of the adhesive friction component, whereas a higher work of adhesion results in higher friction for polyamide and polypropylene. Within this context, most Cr-based nitrides exhibited coe cients of friction below 0.4. In contrast, polystyrene leads to a friction-reducing material transfer. Therefore, a customized deposition of the injection molds with an appropriated PVD film system should be
carried out according to the processed plastic.
Description
Table of contents
Keywords
Physical vapor deposition, CrN, CrAlN, CrAlSiN, Al2O3, Amorphous carbon, Tribological properties, Polystyrene
Subjects based on RSWK
PVD-Verfahren, Chromnitrid, Aluminiumoxide, Kohlenstoff, Amorpher Zustand, Tribosystem, Polyamide, Polypropylen, Polystyrol